Machine Models | Vα-80H |
| Injection Unit Specifications |
Screw Dia. | mm | 32 | 36 |
Theoretical Displacement | cm3 | 104 | 132 |
Inj. Capacity, Max. GP-PS | Grams | 99 | 125 |
oz | 3.49 | 4.40 |
Max. Inj. Press.(※1) | kgf/cm2 | 2466 | 1948 |
Max. Pack Press.(※1) | kgf/cm2 | 2097 | 1656 |
Max. Inj. Speed(※1) | mm/s | 166 |
Max. Inj. Rate(※1) | cm3/sec | 133 | 169 |
Max. Inj. Speed(※2) | mm/s | 300 |
Max. Inj. Rate(※2) | cm3/sec | 241 | 305 |
Plasticizing Capacity(PS) | kg/hr | 71.82 | 99.97 |
Screw L/D ratio | | 22 | 20.5 |
Screw Stroke | mm | 130 |
Screw Stroke(※7) | rpm | 0-375 |
Nozzle Touch Force | Tonf | 2(3.0) |
Nozzle Moving Stroke | mm | 260 |
Total Heat Capacity | kw | 6.80 |
Clamp Unit Specifications |
Clamping Force | Tonf | 80 |
Max. Clamp Stroke | mm | 320 |
Min/Max Mould Height | mm | 150-350 |
Max Open Daylight | mm | 670 |
Tie-bar Distance (HxV) | mm | 360x360 |
Platen Dimensions(HxV) | mm | 540x510 |
Locating Ring | mm | 100/125 |
Clamp Speed | | |
Dry Cycle Time(※4) | sec | 1.75 |
Ejector Stroke | mm | 80 |
Max. Ejector Force | ton | 2.5(3.3) |
Clamp Unit Specifications |
Shipping Weight (Roughly) | Kg | 3600 |
Machine Dimensions | mm | 3850x1210x1770 |
Electric Specifications | | |
Machine Power Supply Capacity | kVA | 20.6(27.6※2) |
Machine Transformer Size | kVA | 23.0(43.0※2) |
Input Power Source | 220VAC + - 10% 3Ph 60 + - 1 Hz or 200 VAC + - 10% 3Ph 50/60 Hz + - 1 Hz |
